Building Code Definitions
Browse the glossary using this index
Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL
S |
|---|
sitework | |
sound transmission class (stc)a single number rating derived from measured values of transmission loss in accordance with classification ASTM E413, Determination of Sound Transmission Class. It provides an estimate of the performance of a partition in certain common sound insulation situations | |
specified features, for the purposes of Clause F6, means the following: (a) building elements that may act as obstructions: (b) safety features required under clauses of this code other than Clause F6 (for example, handrails required under Clause D1): (c) changes in direction: (d) stairs and ramps: (e) escape doors: (f) entries to a safe place | |
specified intended lifehas the meaning ascribed to it by subsection (2) of section 39 of the Act as follows: “Specified intended life”, in relation to a building, means the period of time, as stated in an application for a building consent or in the consent itself, for which the building is proposed to be used for its intended use | |
stability | |
standard yearfor the purposes of determining natural lighting, the hours between 8 am and 5 pm each day with an allowance being made for daylight saving | |
surface waterall naturally occurring water, other than sub-surface water, which results from rainfall on the site or water flowing onto the site, including that flowing from a drain, stream, river, lake or sea | |
T |
|---|
thermal resistancethe resistance to heat flow of a given component of a building element. It is equal to the air temperature difference (°C) needed to produce unit heat flux (W/m2) through unit area (m2) under steady conditions. The units are °Cm2/W | |
total wall area | |